Dazza
2013-05-02 05:20:20
Reply to 7 floor: "Support"" re the user manual , this is my suggestion.
After the introduction the first chapter should be ÜSER Setup- with a subtitle "Please read carefully"
Sub sub title- Prior to use please take time to setup your scanner via the following steps.
1/ You must power up you scanner either by connecting via a usb to a PC, or connecting to a vehicle or via the OBD diagnostic plug, or via a 12 V connector.
2/ Navagate to the help screen and write down the SN and password number.
3/ go on the internet to Maxdas.com and Register
4/ Load CD program and save to PC.
5/ load SD card to PC
6/ Start update program and check for updates.
The information is ALL in the current user manual- but the problem it's not at the start of the manual and a bit disjointed.
Consider an edit and like any good manual- place the startup info at the start.